Download android jelly bean 4.1

Download Android jelly bean 4.1 

LEAKED Jelly Bean Firmware Collection



This is a TEST Jelly Bean Firmware and is LEAKED by 360-apple.blogspot.com


All the below JB firmwares can be flashed upon any firmware or custom ROM (Will need a full wipe if coming from Custom ROM).

Instructions:

Unzip the file Open Odin 3.04 (already included in the firmware package) Restart phone in download mode (Home+power+vol down) Connect phone and wait until you get a yellow sign in Odin Add I9300XXDLI7_I9300OXADLI7_I9300XXDLI7_HOME.tar.md5 to PDA Make sure re-partition NOT ticked Start flash, sit back and wait a few minutes. If you encounter any issues with the firmware (Any FC, Bootloop etc) Boot into recovery mode (Home+power+vol up) Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!) Then choose reboot and you should be good to go!

Android - Android 4.1, Jelly Bean

Android - Android 4.1, Jelly Bean

How To Install Android 4.1.1 Jelly Bean On Samsung Galaxy S3

How To Install Android 4.1.1 Jelly Bean On Samsung Galaxy S3

"We also had some troubles, for instance the internal SDCARD got formatted and some apps can't be installed due to problems with smdl2tmp1.asec (which can't be found at all). These problems could also be local to the specific device. A good suggestion is to make backup of everything prior flash," said the report. The site also provided the steps for flashing the ROM. However, there are certain crucial aspects that one must be aware of before going ahead with it: This is a pre-release version of the OS and not official from KIES. This will void your warranty after rooting the device. So, don't try this if you are not sure enough. The device must be rooted and have ClockworkMod Recovery flashed. Make sure that you have taken a NANdroid backup in case things go wrong. Please note that IBTimes will not be held responsible if any user loses data or the device gets damaged while following the steps explained below. Users must proceed at their own risk.


Step 2: Extract the contents of both zip files.

Step 3: Shut down the Galaxy S3. Press and hold Home + Power + Volume Down buttons to go into Download Mode.

Step 4: Launch ODIN on your PC from the .zip, extracted in Step 2.

Step 5: Connect the Galaxy S3 with your PC. ODIN will show a message saying it has recognized the device.

Step 6: From ODIN, click on PDA and choose CODE_I9300XXDLG4_11164_REV00_eng_mid_noship.tar.md5 which will be inside the Jelly Bean ROM, extracted in Step 2.

Step 7: Make sure that you have unchecked re-partition. Click Start.

Step 8: After being booted, the device should get into a boot loop. Remove your device's battery and put it back again.

Step 9: Now boot into ClockworkMod Recovery by pressing and holding Home + Power + Volume Up.

Step 10: Select wipe / factory reset.

Step 11: Select reboot system now.